current: 0.5 a voltage range: 200 - 600v AU01Z - au01a AU01Z au01 au01a maximum peak reverse voltage v rm 200 400 600 v maximum peak reverse surge voltage v rsm 250 450 650 v maximum average forward current i f(av) 0.5 a maximum peak forward surge current ( 50 hz, half-cycle, sine wave, single shot ) maximum forward voltage at i f = 0.5 a v f 1.7 v maximum reverse current at reverse voltage ta = 25 c i r 10 m a maximum reverse current at reverse voltage ta = 100 c i r(h) 150 m a maximum reverse recovery time ( note 1 ) trr 0.4 m s junction temperature range t j - 40 to + 150 c storage temperature range t stg - 40 to + 150 c note : (1) reverse recovery test conditions : i f = 10 ma, i rp = 10 ma. i fsm 15 a high current capability high surge current capability high reliability low reverse current low forward voltage drop fast switching for high efficiency case : do-41 molded plastic epoxy : ul94v-o rate flame retardant lead : axial lead solderable per mil-std-202, polarity : color band denotes cathode end mounting position : any features mechanical data d a b a c do-41 dim min max a 25.4 ? b 4.06 5.21 c 0.71 0.864 d 2.00 2.72 all dimensions in mm fast recovery rectifier diodes maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol weight: 0.34 grams (approx.) ! ! ! ! ! ! ! ! ! ! ! ! 1 of 2 www.sunmate.tw unit method 208 guaranteed
fig.1 - reverse recovery time ch aracteristic and test circuit diagram fig.2 - derating curve for output fig.3 - m aximum non-repetitive pe ak rectified current forw ard surge current 0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100 ambient temperature, ( c) number of cycles at 50hz fig.4 - typical forward characteristics fig.5 - typical reverse characteristics 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 ta = 25 c 0.8 0.6 0.4 0.2 1.0 10 10 1.0 12 0 15 0 9 6 3 1.0 80 0.01 0.1 0.1 100 140 0 20 40 60 120 percent of rated reverse voltage, (%) peak forward surge current, amperes average forward output current, amperes forward current, amperes reverse current, microamperes t j = 25 c t j = 100 c 20 m s 200 m s forward voltage, volts trr 0.1 i rp 10ma i f 10 ma i rp 100 w 0.001 0.01 specimen note : i f = i rp = 10 ma to 1 ma 100 m f 2 of 2 rating and characteristic curves ( AU01Z ~ au01a ) www.sunmate.tw
|
